- Home
- Trunion Mounted Ball Valve
Trunion Mounted Ball Valve
Trunion Mounted Ball Valve
- Emergency Sealant Injections – Fitting Prevents Leakage From The Stem
- Blow Out Proof Stem – Integrally Inserted Stem Functions As The Backseat For Assured Stem Sealing At All Pressures
- Emergency Sealant Injections – Fitting Prevents Leakage From The Seat
- ISO 5211 Mount Pad- Simplifies The Installation Of Actuators With Standardized Connections
- Drain Plug- Relives The Body Cavity
- Double Sealing O Rings – Prevents Leakage From The Stem Area
- O Ring And Gasket Combination – Prevent Leakage From The Body Joint Area
- Floating Springs- Loaded Seats Assure Sealing Even At Low Pressure
- Metal To Metal Sealing – When Soft Seal Are Deteriorated By Fire , Seat Float To Shut Off The Line Media
Two piece design
- Class 150 – 2” to 24” ( DN50 to DN600) Equivalent EN / DIN Standards
- Class 300 – 2” to 24” ( DN50 to DN600) Equivalent EN / DIN Standards
- CLASS 600 – 2” TO 24” ( DN50 TO DN600) Equivalent EN / DIN Standards
- CLASS 900 – 2” TO 6” ( DN50 TO DN150) Equivalent EN / DIN Standards
- CLASS 1500- 2” TO 6” ( DN50 TO DN150) Equivalent EN / DIN Standards
- CLASS 2500 – 2” TO 6” ( DN50 TO DN150) Equivalent EN / DIN Standards
THREE PIECE DESIGN
- Class 150 – 10” to 56” ( DN250 to DN1400) Equivalent EN / DIN Standards
- Class 300 – 10” to 56” ( DN250 to DN1400) Equivalent EN / DIN Standards
- CLASS 600 – 10” TO 56” ( DN250 TO DN1400) Equivalent EN / DIN Standards
- CLASS 900 – 8” TO 36” ( DN200 TO DN900) Equivalent EN / DIN Standards
- CLASS 1500- 8” TO 24” ( DN200 TO DN600) Equivalent EN / DIN Standards
- CLASS 2500 – 8” TO 18” ( DN200 TO DN450) Equivalent EN / DIN Standards